しっくいモルタルのしっくいプロセスの詳細な説明

セメントモルタルに代わる新製品として、石膏モルタルは従来のセメントの強度を持ち、セメントよりも環境に優しく耐久性があります。接着力が強く、粉状、ひび割れ、くぼみなどが発生しにくく、使い勝手が良いです。コストが低くなります。では、石膏モルタル左官工事の建設プロセスは何ですか?しっくいモルタルのしっくい工法を見てみましょう。

草の根の処理

1.建設前に、草の根の表面のほこり、油汚れ、汚れ、セパレーター、その他の不純物を取り除きます。

2.ベースの凹凸のある部分と開口部は明確に扱い、平らでしっかりと保つ必要があります。

3. The gap between the door and window frame and the wall should be infilled according to the doors and windows of various materials;

4. Wet the base layer with water in advance, pay attention to the surface without clear water before plastering;

5. Start to make corners around walls, doors, windows and pillars.

しっくいの構造

Gypsum mortar plastering process

1. Ceiling

Spring line-plastering cake-lower ruler-upper ruler-plastering the concrete window sill-wall punching-plastering of the floor-plastering of the face.

2. Wall

Find the rules to paste the gray cake-wipe the skirting-make the corner of the door and window hole-wipe the cement window sill-wall punching-wipe the bottom dust-wipe the face dust.

しっくいの構造

Gypsum mortar plastering operation process

1. Determine the plastering sequence, first up and then down, starting from the side of the door, the entire wall is continuously operated;

2. The ordinary concrete ceiling can be plastered with plaster plaster;

3. According to the flatness of the wall base, signs or standard bars should be set; the distance between the vertical standard bars should be 1.2-1.5 meters, and the width of the standard bars should be 0.03-0.05 meters;

4. If the thickness of plastering is less than 0.05 meters, it can be plastered directly with gypsum mortar, if it is more than 0.05 meters, it can be directly grounded with a light bottom layer, and then plastered with a surface layer;

石膏ベースのセルフレベリングモルタル

5.設計された厚さに応じて石膏モルタルをベース層に塗り、次にH字型の定規とスクレーパーを使用してリブに密着させ、上下左右の平らな灰の層をこすります。

6.こてで押してから、定規で壁の平坦度を確認します。

7.左官工事の後、時間内に関連する位置をきれいにするために特別な注意を払ってください。

8.モルタルを左官工事するときは、石膏をきれいにする必要があります。カレンダリング後は、通気性に注意し、仕上げを水で洗わないようにしてください。建設が完了した後、時間内に左官ツールをきれいにすることを忘れないでください。

上記はすべて石膏モルタル左官工事の建設プロセスに関するものです。石膏モルタル左官の選択は約10-15%を減らすことができ、効果的にリワーク現象を減らすことができます。新技術を開発した高品質な環境保護製品です。