AACパネルの性能特性

/in /by

オートクレーブ軽量気泡コンクリートパネル：AACパネルは、40年の開発期間を経て、日本および欧州諸国の高度な技術と応用経験を導入および吸収して製造された高性能オートクレーブ軽量気泡コンクリートパネルです。これは、珪砂、セメント、石灰、およびその他の原材料に基づいており、高圧蒸気養生して複数の多孔性のコンクリートシートを形成します。壁材だけでなく、屋根板もできるのは、新しい建材の優れた性能の一種です。その主な機能は次のとおりです。

1.Bulk density: AAC board bulk density is light, (absolutely dry) Y0= 600-700kg /m3, dry density is 1/3 of red brick, 1/4 of concrete, dry density is lighter than water, known as floating on the surface of the concrete.

2.Strength: Cube compressive strength ≥ 4Mpa, single point hanging force ≥1200N. As a non-load-bearing maintenance structural material, it can fully meet the bending resistance, cracking resistance and joint strength requirements of the plate under various use conditions. It is a kind of lightweight and high strength maintenance structural material.

AACパネル

3.Thermal insulation: the material not only has good thermal insulation performance, thermal conductivity is only 0.11-0.16W/M.K, but also has good thermal insulation performance [thermal storage coefficient S=2.75W(M2.K)]. When a reasonable thickness is used, it can not only be used in cold areas with high insulation requirements, but also in hot summer and warm winter areas or hot summer and cold winter areas with high insulation requirements to meet the requirements of energy saving standards.

4. Sound insulation: the material is a kind of porous material composed of a large number of uniform and disconnected small pores, with good sound insulation performance, the average volume of 100 thick AAC board 40dB, the average volume of 150 thick AAC board 45dB;

5. Fire resistance: AAC plate is a non-combustible inorganic material, with good fire resistance, fire resistance limit as wallboard 100 thick plate >3 hours; 150 thick plate >4 hours; 50 thick plate protection steel beam fire resistance >4 hours; All exceed the first-grade fire resistance standard;

AACパネル

6. Durability: AAC is a kind of inorganic silicate material, not aging, good durability, its service life can match the service life of all kinds of buildings;

7. Freezing resistance: good frost resistance, mass loss <1.5%(national standard <5%) after freeze-thaw test, strength loss <5%(national standard <20%);

8. Impermeability: good impermeability, 5 times better than the standard brick impermeability;

9. Softening coefficient: high softening coefficient, RW/RO =0.88;

10. Green environmental protection material: the material is no radioactivity, no harmful gas escape, is a green environmental protection material;

11. Construction: AAC plate production, standardization, industrialization of installation, sawing, cutting, planing, drilling, construction dry work, fast;

12. Matching: AAC board has a perfect application supporting system, equipped with special connector, pointing agent, repair powder, interface agent, etc.

13. Construction is simple and low cost: the use of this material without plastering, reduce the cost of 20-25 yuan/square meter; Can directly blow putty spray paint;

14. Surface quality is good, no cracking: the use of this material because of the use of dry construction, so there is no empty drum crack phenomenon on the surface;

15.内部パーティションにAACボードを使用すると、使用可能領域が増える可能性があります。