POLYMER PLASTERING (CRACK-RESISTANT) MORTAR
Product standards: GB/T29906-2013 |
|||
Item |
Technical Parameters |
||
Tensile bond strength MPa (with cement mortar) |
Original strength |
≥0.5 |
|
Water resistance |
Immersed in water for 48h and dried for 2h |
≥0.3 |
|
Immersed in water for 48h and dried for 7d |
≥0.5 |
||
Frost resistance strength |
≥0.5 |
||
Tensile bond strength MPa(with molded board) |
Original strength |
≥0.1The damage occurred in the molded board |
|
Water resistance |
Immersed in water for 48h and dried for 2h |
≥0.06 |
|
Immersed in water for 48h and dried for 7d |
≥0.10 |
||
Frost resistance strength |
≥0.10 | ||
Ratio of compressive strength to flexural strength |
≤3.0 |
||
Water absorption/g/m2 |
≤500 | ||
Operation time/h |
1.5-4.0 |
- Application Range: It can be used for anti-cracking and leveling treatment of polystyrene board (eps) insulation surface layer, extruded board (xps) insulation surface layer and various insulation mortar surface layers.