SPECIAL THIN LAYER PLASTERING MORTAR
|
Executive standard: JC/T 890-2017 |
||||
|
Item |
Technical Parameters |
|||
|
Water retention(%) |
≥99.0 |
|||
|
Shrinkage(%) |
≤0.20 |
|||
|
Strength |
Strength grade |
M5.0 |
M7.5 |
M10 |
|
MPa Compressive strength 28d/MPa |
≥5.0 |
≥75 |
≥10.0 |
|
|
Tensile bond strength(bonded with AAC)14d/MPa |
≥0.25 | ≥0.30 |
≥0.40 |
|
|
Frost resistance |
Strength loss rate/% |
≤25 |
||
|
Mass loss rate/% |
≤5 |
|||
SPECIAL MORTAR FOR AUTOCLAVED AERATED CONCRETE PRECISE BLOCK WALL
- Super water retention Strong bonding. Suitable temperature 5-35℃.
- A thin-layer plastering mortar specially used for autoclaved aerated concrete block wall made of cement, admixture and sand.
- Application Range: It is suitable for plastering works of aerated concrete blocks and aerated concrete panels.
EXCELLENT FEATURES
1.Strong bonding and good water retention, can effectively solve the problem of large water absorption of AAC blocks.
2.No cracks after hardening, good durability.
3.Good workability, easy to be smeared into a uniform and flat layer, convenient for construction.
4.The material consumption is saved, the total weight of the wall and the bearing of the building foundation are reduced, the effective space of the room is increased, and the comprehensive benefit is greatly improved.
